|
Drawing Supplies
A wire is a single, usually cylindrical, elongated strand of drawn metal. Wires are used to bear mechanical loads and to carry electricity and telecommunications signals. Standard sizes are determined by various wire gauges. more...
Home
Bead Art
Cake Decorating
Candle & Soap Making
Cardmaking & Scrapbooking
Ceramic & Pottery Making
Children's Crafts
Crochet
Cross Stitch
Embroidery
Fabric
Floral Supplies
Framing/ Matting
Glass Art Supplies
Hand-Crafted Items
Knitting
Lacemaking
Latch-Hook/ Rug-Making
Leathercraft
Mosaic
Other Crafts
Painting, Drawing & Art
Drawing Supplies
Other Drawing Supplies
Palettes/ Easels
Paper & Pads
Pastels
Pencils & Charcoal
Pens & Markers
Storage/ Boxes
Other Art Supplies
Painting Supplies
Paper Crafts/ Origami
Quilting
Rubber Stamping
Sewing
Tapestry & Needlepoint
Woodworking
The term wire is also used more loosely to refer to a bundle of such strands, as in 'multistranded wire', which is more correctly termed a cable.
Wire has many uses. It forms the raw material of many important manufacturers, such as the wire-net industry, wire-cloth making and wire-rope spinning, in which it occupies a place analogous to a textile fibre. Wire-cloth of all degrees of strength and fineness of mesh is used for sifting and screening machinery, for draining paper pulp, for window screens, and for many other purposes. Vast quantities of aluminium, copper, nickel and steel wire are employed for telephone and data wires and cables, and as conductors in electric power transmission, and heating. It is in no less demand for fencing, and much is consumed in the construction of suspension bridges, and cages, etc. In the manufacture of stringed musical instruments and scientific instruments wire is again largely used. Among its other sources of consumption it is sufficient to mention pin and hair-pin making, the needle and fish-hook industries, nail, peg and rivet making, and carding machinery; indeed there are few industries into which it does not enter.
Not all metals and metallic alloys possess the physical properties necessary to make useful wire. The metals must in the first place be ductile and strong in tension, the quality on which the utility of wire principally depends. The metals suitable for wire, possessing almost equal ductility, are platinum, silver, iron, copper, aluminium and gold; and it is only from these and certain of their alloys with other metals, principally brass and bronze, that wire is prepared. By careful treatment extremely thin wire can be produced. Special purpose wire is however made from other metals (e.g. tungsten wire for light bulb and vacuum tube filaments, because of its high melting temperature).
History
In antiquity, jewellery often contains, in the form of chains and applied decoration, large amounts of wire that is accurately made and which must have been produced by some efficient, if not technically advanced, means. In some cases, strips cut from metal sheet were made by pulling them through perforations in stone beads. This causes the strips to fold round on themselves to form thin tubes. This strip drawing technique was in use in Egypt by the 2nd Dynasty. From the middle of the 2nd millennium BC most of the gold wires in jewellery are characterised by seam lines that follow a spiral path along the wire. Such twisted strips can be converted into solid round wires by rolling them between flat surfaces or the strip wire drawing method. Strip and block twist wire manufacturing methods were still in use in Europe in the 7th century AD, but by this time there seems to be some evidence of wires produced by true drawing. Square and hexagonal wires were possibly made using a swaging technique. In this method a metal rod was struck between grooved metal blocks, or between a grooved punch and a grooved metal anvil. Swaging is of great antiquity, possibly dating to the beginning of the 2nd millennium BC in Egypt and in the Bronze and Iron Ages in Europe for torcs and fibulae. Twisted square section wires are a very common filigree decoration in early Etruscan jewellery. In about the middle of the 2nd millennium BC a new category of decorative wires was introduced which imitated a line of granules. Perhaps the earliest such wire is the notched wire which first occurs from the late 3rd, early 2nd millennium BC in Anatolia and occasionally later.
Read more at Wikipedia.org
|
|